Heavy Equipment Transport In Toronto And Ontario

Moving machinery starts with understanding the load and how it will be loaded and unloaded. A forklift going to another warehouse, a crated machine going onto a trailer and an oversized piece of equipment may need different transport arrangements.

Norman Towing helps customers discuss equipment and machinery transportation across Toronto, the GTA and Ontario. Share the load details before booking so the equipment, route and delivery arrangements can be assessed.

Tilt And Load, Step-Deck And Heavy Haul

Tilt And Load For Ground-Level Loading

A tilting deck creates an approach for loading suitable vehicles or equipment from the ground. It is useful when the cargo can be driven or winched onto the platform and there is enough room to position and operate the truck. Some transfers to another trailer or a loading dock are possible with compatible equipment and a planned loading arrangement.

See our tilt and load towing guide for examples involving vehicles, crates and workshop equipment.

Step-Deck Trailers For Taller Equipment

A step-deck trailer has an upper section and a lower main deck. The lower section can help manage the overall transport height of suitable machinery. Deck length, axle loading, ground clearance and the loading method still need to be checked. A step-deck does not automatically tilt or lower to the ground.

Heavy Haul For Larger Or Heavier Loads

Heavy haul planning may involve a float, lowbed or another specialized trailer arrangement. The choice depends on the equipment's dimensions and weight, how that weight is distributed and the route. Ask Norman Towing to confirm the appropriate arrangement and availability for your specific load.

Ontario requires an oversize or overweight permit when the combined vehicle and load exceed applicable legal limits. Local roads may have separate requirements. Review Ontario's oversize and overweight load guidance as part of planning the move.

Machinery And Equipment Moves

• Construction equipment moving between job sites.
• Forklifts, lifts and industrial machinery moving between facilities.
• Crated equipment and large mechanic's toolboxes.
• Vehicles or machinery being transferred onto a suitable trailer.
• Non-running equipment or accident-damaged vehicles needing a loading assessment.

These are examples to discuss with dispatch. The assigned equipment must be suitable for the actual load and the conditions at both ends of the trip.

Plan The Pickup And Delivery Together

A truck may have room to load at one location but limited access at the other. Tell us about gates, slopes, overhead obstructions, soft ground and restricted delivery hours. For a dock or trailer transfer, include platform height, available space and the receiving site's contact.

Confirm who will provide any additional lifting or handling equipment. Crates need suitable support and securement, and toolboxes need their contents and moving parts secured. Do not assume that the equipment used at pickup will also be available at delivery.

Information Needed For A Transport Quote

• Equipment make, model and photographs, including the manufacturer's weight information where available.
• Overall length, width, height and weight, including attachments.
• Whether the equipment runs, rolls or needs separate handling assistance.
• Pickup and delivery addresses, site contacts and preferred timing.
• Ground conditions, access restrictions and trailer or dock details.

Accurate information helps avoid sending a truck that cannot access the site or carry the load. Discuss permits, loading assistance and any special arrangements before confirming the move.

Book Tilt And Load Service

Call Norman Towing at 647 244 1129 or request service online. Send the pickup and delivery addresses, photographs, dimensions and weight so we can confirm suitable equipment, availability and pricing.